I have error code 25 (knock sensor or ECU). I have replaced the knock sensors, cam position sensor, plugs, wires, and coils. Car runs great but I still get error code 25. I can clear it but will come back.
I put this in some "replies" but the threads were older and not sure who will see them at this point. This is how I fixed my power seats not engaging the gears. It is advice I got from the peachparts forums so I decided to film it...
I managed to pull the complete interior out of a 300E at the local U pull n pay, including seats for a future transplant into my baby. The carpet from the donor car has the usual stains and I wanted to make sure I didn't ruin it by cleaning it in the wrong manner. The other...
My daily driver 1995 E300 Diesel recently stopped blowing air cold/hot. Here are the symptoms and what I've done so far to diagnose/isolate the problem:
1995 W124 with OM606.910 diesel engine - 132,000 1 owner miles. Dealer maintained (for what that matters) by previous owner.
I cleaned the two front ABS sensors during a front wheel bearing repack.
The ABS light turns on with ignition switch on then turns off as the engine starts only to turn back ON (and stay ON) at around 20 kph (around12 mph).
Any ideas as to why ??
BenzWorld.org forum is one of the largest Mercedes-Benz owner websites offering the most comprehensive collection of Mercedes-Benz information anywhere in the world. The site includes MB Forums, News, Galleries, Publications, Classifieds, Events and much more!