Mercedes-Benz Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 24 Results
  1. W201 190-Class
    Hi everyone, A month ago, I had problems with my w201 190e 2L. I diagnosed that my K-Jetronic diaphragm needed to be repared so I bought a kit to repair all distributor joints. I has been done and now the distributor works perfectly. The input and output of gasoline are working good Injectors...
  2. W204 C-Class
    Afternoon everyone, I know this issue has been discussed at length on these forums, so I apologize for the redundancy. However - I feel as if my issue is more unique than others, and I wanted to post this in case someone else is experiencing the same thing. I drive a 2010 C300 Sport 4Matic...
  3. W140 S-Class
    Owned the C140 for about 6 years now, this issue still plagues me, and I still have not figured out what the cause is. Context: When starting the car at random, whether it is hot or cold, the engine will crank for about 5-7 seconds, but sometimes will not turn over-- sometimes it even does...
  4. R129 SL-Class
    So my dad has a early 90's SL500 which no longer accepts the key into the ignition. It looks like something within the lock is blocking the key. We need to move the car and it seems impossible if the key is blocked from the ignition. Has anyone else had this issue and know of a solution?
  5. R/C107 SL/SLC Class
    My 380SL doesn't start in P most of the times. The person I purchased it from said that I should move the gear to N and try starting. It works every time when the gear is in N. Not sure why and what the issue is, but cold or hot, 95% of the times my car starts only when the gear is in Neutral...
  6. W210 E-Class
    Hello, I have a w210 300D from 1996. It has the old style flip key with only one bottom. In 1997 mercedes changed the ignition for a Electronic one (like the newer models). My question is : Is it possible to retrofit a electronic key into my car? I live in Europe and the dealer asked me 600€...
  7. R230 SL-Class
    I have a 2003 SL500. V8 convertible. It will not start. I tested the relay, it failed. I installed a new one and now when turn the key to start it blows the fuse. Fuse number 4 in the F32 power supply fuse box. I found that is powers the EIS but that is the only info I can find about. Does...
  8. W210 E-Class
    so i recently did this guide 96 E320 Steering wheel locked! Please Help! - MBWorld.org Forums to install a new ignition cuz it was broken and got all that done and when i turn the key the engine starts going but the car doesnt start (this happened while the ignition was broken too cuz we tried...
  9. W210 E-Class
    im not sure what its actually called but its W0133-1608116 and basically even with a screwdriver in where the switch is supposed to go it just doesnt move, and its supposed to be in a certain position to get the pins to press down so we can put the ignition on and were not sure if were missing...
  10. W246 B-Class
    I was driving and suddenly warning for parking brake came up on the display, following seconds everything from tire pressure control, srs, abs also warnings. It went to limp mode and no power steering. When I come home I stopped engine and trying parking brake and it’s work as it should. Starts...
  11. W202 C-Class
    IM ABOUT DONE!!!! Okay I have a 1997 c280 with the switch blade kind of key, and I’m pretty sure there’s a chip in the key fob to read for the theft system and those sort of things (that info doesn’t necessarily matter seeing as I have to probably drill or cut the tumbler) just wanted to give as...
  12. Vintage Mercedes-Benz to end of 1976
    I have w114 280CE 1973, I am based in the UK so euro spec.. In the pictures you can see before and after I took out everything, Ignition module box was only connected with one connector. wires from ECU were just hanging around. I would preferably convert to aftermarket ignition, my question is...
  13. Vintage Mercedes-Benz to end of 1976
    Hello, For the last day, I have been trying to figure out why my spark is so weak and inconsistent on my 280SE 2.8L (See Video 4 seconds) I have: New sparkplugs (NGK BP6ES | Gapped to 0.8mm) Cleaned all the distributor contacts with sandpaper Tested the Bosch SU12 Ignition Coil (Primary: 3.1...
  14. W126 S,SE,SEC,SEL,SD,SDL Class
    So my car was working fine yesterday, but today when I tried to start it nothing happened. I don't think its the battery because the ac and indicator lights come on, but there is no sound coming from the engine at all. I am very new to cars and this is the first time I've dealt with a car that...
  15. W213 E-Class
    yesterday, my car did not turn off like it normally does. As I walked away from my now locked vehicle I noticed the radio was still on. I returned and it took several tries of starting the engine and removing the key before things shut down. Today my car won't start, but there was enough...
  16. W126 S,SE,SEC,SEL,SD,SDL Class
    Hey all, Recently had the ignition control module replaced on my 1983 Euro 280SEL (2.7L I6) in an attempt to solve intermittent stalling while driving/idling. Since replacing the module, the vehicle will now remain running but for some reason, the idle RPM drops from 1K to about 500 every few...
  17. W126 S,SE,SEC,SEL,SD,SDL Class
    Been having some issues with the ignition on my 83 380 SEL. Car will crank but not start. So far I’ve replaced the ignition coil but that doesn’t seem to be the problem. The distributor looks to be in good condition. Is there a relay I can replace to fix this or is there something else that may...
  18. Vintage Mercedes-Benz to end of 1976
    Hi everybody, I am trying to get the ignition lock assembly out from my W108. I have the clamp holding the lock in place removed ( 10mm head / 11mm nut ). and out of the way. I try to wiggle the lock assy. away by pulling it straight out, but the badboy does not want to come out. I tried with...
  19. C209/A209 CLK-Class
    Hi all, my CLK55 has been sitting for over a week now because I cannot start it. I had someone come and check if the ignition module (EIS) has power and he used a tool which showed ignition does not have power. The issue started happening with cooler temperatures approaching. I bought the car...
1-19 of 24 Results
Top