Date registered: Mar 2015
Vehicle: 1989 W124 260E
Location: Kidderminster in Worcestershire
Mentioned: 2 Post(s)
Quoted: 146 Post(s)
You can purchase a brake piston wind back tool from ebay . Myself i use a large G clamp . But some pistons need screwing back in to the caliper .You will identify these though the 2 holes in the piston crown i have the end of a pair of c clip pliers ground down to fit inside the holes inside the caliper crown. Dont forget to remove the top on your master cylinder and keep an eye on the fluid level .As you push or wind back the piston the fuid will return to the catch tank and over flow in some cases.
This is a retro ride .
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.