1994 Mercedes E320 wagon driveline/driveshaft broke issues - Page 3 - Mercedes-Benz Forum
Reply
 
LinkBack Thread Tools Display Modes
post #21 of 46 (permalink) Old 08-10-2019, 01:16 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
augapfel, thanks for your excellent last post. Right now, the mercedes is still at the shop outside and I will have the tow truck come out on Monday. Will definitely follow up as soon I get started to work on removal of the shifter cable and inspected the transmission flange. By the way, I ordered a used shifter cable and been researching this transmission flange yoke part. The issue is this case right now is finding the correct part name and number automatic transmission flange 1232720545, 2022720345 fits W201, w124. I doubled-checked, cross-reference checked on this particular flange or yoke, came up different names different parts number but meaning the same thing or part. It also has to make sure it is compatible with the transmission (722.369 03 937210). Some of the transmission flanges indicates that only fit on 722.4 transmission. Can anyone out there shed any light on the exact part name and number that fits on my particular transmission yoke or flange or propeller shaft, etc.? Stay tune for the exciting adventures of this ongoing saga.
dmorgan1952 is offline  
Sponsored Links
Advertisement
 
post #22 of 46 (permalink) Old 08-10-2019, 03:07 PM
Lifetime Premium Member
 
LeftCoastGeek's Avatar
 
Date registered: Jul 2011
Vehicle: 1993 300CE Cabriolet (mine) ; 1994 E320 Wagon (wife's) ; 1990 Benz 300E 2.6 (son's)
Location: S'Cruzin Around on the Left Coast
Posts: 6,662
Mentioned: 14 Post(s)
Quoted: 1361 Post(s)
Lifetime Premium Member
the only reliable way to get the correct part numbers is to use your VIN and look up the parts on ISPPI, Mercedes parts catalog (formerly called EPC) The notes on a given part will list which engine or transmission number ranges it applies to, if there are variants. the 'data card' on ISPPI associated with your VIN will list your engine and transmission serial numbers.
dmorgan1952 likes this.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
LeftCoastGeek is offline  
post #23 of 46 (permalink) Old 08-11-2019, 12:12 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
what is the website address on ISPPI, Mercedes parts catalog (formerly called EPC)

LeftCoastGeek, thanks for your last post. Hopefully, I will get the correct part name and number that matches to my automatic transmission number. However, I cannot seem to find the website address you refer to look up the parts on ISPPI, Mercedes parts catalog (formerly called EPC). I tried to googled the ISPPI, only to refer to this forum. Is there an annual fee to access this ISPPI? I read somewhere it is about $75 a year. Can anyone shed any light on this? Also, what is the correct name of this part I am looking for so to make sure I am looking at the right part to avoid confusing and/or misunderstanding, anyway?
dmorgan1952 is offline  
Sponsored Links
Advertisement
 
post #24 of 46 (permalink) Old 08-11-2019, 12:20 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
I forgot to ask about the yoke flange/output shaft yoke, Output Flange Yoke. Should there be a part number on the yoke flange once I removed it from my 1994 Mercedes E320 wagon?
dmorgan1952 is offline  
post #25 of 46 (permalink) Old 08-11-2019, 02:29 PM
Lifetime Premium Member
 
LeftCoastGeek's Avatar
 
Date registered: Jul 2011
Vehicle: 1993 300CE Cabriolet (mine) ; 1994 E320 Wagon (wife's) ; 1990 Benz 300E 2.6 (son's)
Location: S'Cruzin Around on the Left Coast
Posts: 6,662
Mentioned: 14 Post(s)
Quoted: 1361 Post(s)
Lifetime Premium Member
https://aftersales.i.daimler.com/ is the login page, I'm already logged on, so I can only assume there's a link there to register. yes, for individuals its $75/year.

looks like the output flange for a E320 with transmission 722.369 is A1242721445 (at least, tahts what fits my wife's '94 E320 wagon) but I'd be hesitant to replace it before confirming the rear bearing and output shaft are intact.
dmorgan1952 likes this.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
LeftCoastGeek is offline  
post #26 of 46 (permalink) Old 08-11-2019, 03:11 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
LeftCoastGeek, Thanks so much for your last post. I appreciated it. I had been searching for the correct part name and number all day, only to keep getting different names and parts number that confused me greatly, especially trying to match up with transmission model number. Thank you again. I will continue to follow through on my progress on this thread. Stay tune.
dmorgan1952 is offline  
post #27 of 46 (permalink) Old 08-11-2019, 03:45 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
I did some research to find this particular Flange, Trans - Mercedes-Benz A1242721445, only to find out mercedes parts website don't have this flange. I wonder if there is a compatible cross reference part name that matches correctly. However, there were quite a few Russian websites that have the flange available. Any ideas?
dmorgan1952 is offline  
post #28 of 46 (permalink) Old 08-11-2019, 04:13 PM
Lifetime Premium Member
 
LeftCoastGeek's Avatar
 
Date registered: Jul 2011
Vehicle: 1993 300CE Cabriolet (mine) ; 1994 E320 Wagon (wife's) ; 1990 Benz 300E 2.6 (son's)
Location: S'Cruzin Around on the Left Coast
Posts: 6,662
Mentioned: 14 Post(s)
Quoted: 1361 Post(s)
Lifetime Premium Member
ah, here's where the links are to sign up for the ISPPI or whatever they are calling it now that replaced the old EPC...
https://epc.startekinfo.com/epc/
dmorgan1952 likes this.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
. . . . .
LeftCoastGeek is offline  
post #29 of 46 (permalink) Old 08-11-2019, 04:23 PM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
LeftCoastGeek,Thanks for the link.
dmorgan1952 is offline  
post #30 of 46 (permalink) Old 08-12-2019, 09:57 AM Thread Starter
BenzWorld Member
 
Date registered: Jan 2017
Vehicle: 1994 Mercedes E320 wagons (2)
Location: New Johnsonville, Tennessee
Posts: 181
Mentioned: 0 Post(s)
Quoted: 7 Post(s)
(Thread Starter)
Update:
The salvage owner has two transmission flange that are two different sizes. One is 124 272 1345 is 90mm diameter and 124 27 1445 is 100mm in diameter. In order to determine which is the correct one that matches my automatic transmission number:722369 03 937210, I suspected it would be the 124 27 1445 is 100mm. The best thing to make sure the correct size, I should measure the diameter that be around 3.9 inches or 100mm on my old flange that is currently on the Mercedes. The 124 272 1345 is 90mm or 3.5 inches in diameter. As soon as the Mercedes arrives, I will take the measurement of the flange with pictures and will respond back to this thread. Stay tune.
dmorgan1952 is offline  
Sponsored Links
Advertisement
 
Reply

  Mercedes-Benz Forum > Mercedes-Benz Sedan Forums > W124 E,CE,D,TD Class

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Mercedes-Benz Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 

Title goes here

close
video goes here
description goes here. Read Full Story
For the best viewing experience please update your browser to Google Chrome