|Topic Review (Newest First)|
|05-25-2019 01:47 PM|
Originally Posted by 3dogsrock View Post
Did you check your battery voltage? Resync steering angle sensor?
|05-22-2019 01:53 PM|
|3dogsrock||My ABS, ESP and BAS lights have been on since I purchased my CLK 320 Convertible A208 a year ago. I have tried everything mentioned in these forums. So, I purchased a Craftsman 1681 scan tool, it is the same as an Innova 5100. Both of these are compatible with my vehicle and should read the ABS codes. The scanner will read everything else on the vehicle, however, when I ask it to read ABS codes it tells me that I am not connected to the vehicle!. I am connected because I just ran a full diagnostic! Called support and they have no idea except to say that my vehicle is not communicating with the scanner when checking ABS. Any help in this issue would be appreciated.|
|12-30-2015 12:03 AM|
What happens with these switches is they can kill the speed signal within the ESP ECU, many assume that because the brake lamps work, it cannot be part of the problem.
Applies to 202,203,208,209,210,211,215,219,220,230
|12-29-2015 08:38 PM|
|kprent97||You sir, saved me hundreds ($$$) last week. My 2000 SLK 230 gave me the same indications. One swift visit to Nextdayauto and I had the switch replaced within 48 hours for less than $25 (w/shipping)! I now know I can contort into a pretzel (mirror free) and complete the job blood-free and most importantly, dealer-free!! Happy New Year my friend!|
|08-03-2015 03:10 PM|
I have a 1999 Mercedes CLK 320.
ASR/BAS lights on the dash stays on. Does anyone have any suggestions?
I replaced brake light switch, brake booster, and Brake Module.
Took car to dealer who performed diagnostic test and said the problem is the brake module. I replaced it twice but lights are still on.
I would appreciate your help.
|09-07-2012 06:47 AM|
Had the part replaced after the light ( ASR BAS )on the dash kept lighting up all the time. I checked these forums and determined that it was in fact the brake switch. Had it done at my local car guy on wednesday and it worked !!!
|09-07-2012 06:45 AM|
Originally Posted by rsparso View Post
thats the number on my old switch. Hope it helps.
|08-29-2012 05:45 PM|
|rsparso||Anyone have the part # for the switch ?|
|08-29-2012 01:19 PM|
|A1EK||Glad you got it fixed ! this is a very common fault on W210, W202, W208 cars.....|
|08-29-2012 04:03 AM|
|iceman350SL||thanks. I will try this tomorrow and see how it goes|
|This thread has more than 10 replies. Click here to review the whole thread.|