|Topic Review (Newest First)|
|06-16-2019 05:15 PM|
|06-16-2019 02:43 PM|
|docfranco||Thank you, this helps a lot. 👍🏻|
|06-16-2019 10:02 AM|
More Plate types.
|06-16-2019 09:35 AM|
|06-16-2019 09:17 AM|
I hope this helps.
|06-16-2019 09:10 AM|
More of the same, as well as MB winches on 404's & 411's.
|06-16-2019 09:05 AM|
More plate mounts, and MB winches in place on 406/416's.
|06-16-2019 08:58 AM|
The plate type. The Driver's side is a series of plate pieces, welded up with a Spud and an eye. The Passenger side looks to have a Cast or Forged piece that is welded to a plate that wraps the top of the bumper, or it can be an eye, welded to a plate construction. Some shots and diagrams show these in place on 404's and 411's, and while those specific mounts are not intended for the 406/416 series, they do illustrate the design of the mounts.
|06-16-2019 08:48 AM|
One piece mounts, not Plate/Welded.
|06-16-2019 08:33 AM|
More of the same, but photos 1,2,3 & 5 show the upright brackets which bolt to the frame rails. These brackets are multi-purpose, and they become winch mounts with the addition of the bolt-on spud. It is shown in place in photo 1.
The diagram shows two types of mounts - the Cast/Forged mounts (circled), and the plate/welded type to the left.
|This thread has more than 10 replies. Click here to review the whole thread.|