|Topic Review (Newest First)|
|06-08-2019 01:18 AM|
Originally Posted by Rosegro70 View Post
PS.. If you don't have a MB scanner.. You need to get one.. Low end models are in the $100 to $200 price range.. Your new MB scanner will pay for itself, the first time you have to reset SRS.. OBDII can't preform this opperation..
|06-07-2019 06:14 PM|
Welcome to the forum!
Could be a bad cluster, but also, did you check the fuse?
Benzbits: W203 Fuses
Check the wiring harness on the back of the cluster to make sure its plugged in and with no obvious problems. To remove the cluster, follow the fist three steps here:
W203 Cluster Repair
If all is well, you could try a used cluster, but you'll lose the odometer unless you have it erases in the used cluster and then uses SDS to re-code it to your car.
|06-07-2019 02:16 PM|
Instrument cluster not working
Bought a 2003 C240. The Instrument cluster does not work. Replaced LED Display. Speedometer ,tach and gas gauge do not work as well. Scan came up with a P0600 Serial Com Link Error. Has anyone had this problem.