Mercedes-Benz Forum banner

another e320 brake question

414 views 2 replies 2 participants last post by  Muzzleloader 
#1 ·
Arg, I can't find my PW for old account and don't have access to old email ...

Anyway, here is my ask for help/direction.

Replaced rotors pads on the front of the frau's e320cdi (2005). I didn't have the correct sensor for the front left and the old one with the strip splice was in rough shape. I left it out expecting a indicator light and would address when I did the ball joints. Anyway, a gal bumped her and was 9 business days in shop. Then some travel and weather, holidays etc. (Oh yeah, I had knee surgery) Anyway, I got around to it over the weekend after bringing her to the airport. Pads in the rear, upper ball joint and new spliced sensor ( check and is shorted). Anyway, the light is still on The brake light switch was replaced about 18-24months ago. Can I test or need to replace before I start the colorful language about the SBC.?

We have almost 205K
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top