Nobody can see the the pictures because you have them at a secure login place on Google.
Just attach them here.

 

Sorry for that little mess there. This is the first time im using this forum.
You should be able to see the pictures now.

 

Looks like you may have a seal on the turbo leaking a little oil. I think you can be sure it is coming from the engine as that is where the oil comes from to lubricate the Turbo bearings. Not sure what you are looking for -- suggestions -- that it to someone who can determine what if anything needs to be done.

 

I cannot identify from the photos if the oil leak could be from the turbo seals but those do have issues, there are technical bulletins describing the seal fix.

The leaking oil tends to drop on the motor that controls air intake flaps and this small motor often fails because of the oil.

 

There is nothing wrong with the sealing of the turbo.
Can it be anything wrong with the top gasket or sealing inside the motor? if u understand what i mean.
Right now im working my way trou the motor...

 

I mean can it be something wrong with the cylinder head gasket?

 

I doubt it is anything inside the motor. There is no direct connection. As you know know
the turbo is driven by exhaust gases and then compresses fresh air into the engine.

Did it ever give you a puff of blue smoke when it started before you started taking it apart?
If it did then the turbo seal is the most likely candidate.

 

is it posible that the motor oil some how gose in to the drainage channel
thats in the motor? As far as i know that hole (where the screwdriver is) leads to a drainage channel. am i right? i have marked the hole in this last photo.

 

That is not a drain hole or part of the oiling system.

 

How much oil are you actually losing via this leak? Have you had to add oil? Is it dripping onto the noise encapsulation panels? From what I see in you pictures it looks like seepage and not a leak that needs immediate attention.

 

When the motor gos the leaking is nonstop from picture 1. i had to refill oil.
I have take the manifoll of today. this is how it looks..

 

Hi, how did it go with the repair, did you find the root for the oil leakage ?

 

It looks like you have oil inside of the intake manifold, am I seeing things correctly?

 

WOW, that has been going on for awhile and yes it looks like there is some in the intake.

 

Did you ever find a fix for this. I have a oil drip from this same hole on my 2007 Blutech.

 

The problem on all this V engines 280,300,320,350 leaking from that hole is oil cooler seals. I have change them and no leak any more. But it takes at least one day work because needs to take out turbo, air intake system and complet other equipment which betwen to engine bloks. The oil cooler is in the end down betwen to blocks.