W210 cabin filter exchange - Benzworld.org

mike69 · 05-06-2008, 02:51 AM

Please could anybody give an advice how to remove glove box to get to the cabin filters?
I unscrew the 6 screws but there are 2 another left near glove box lamp and I do not know how to unscrew them to remove glove box.

Is there any other filter for automatic air condition or just that one in glove box?

Thank you in advance.

KC420 · 05-06-2008, 05:52 AM

sent you private message with the explanations.

thebenzbar · 05-06-2008, 11:58 AM

Courtesy of ohlord: http://www.benzworld.org/forums/w210...lter-tips.html

mike69 · 05-07-2008, 01:47 AM

Guys, thank you very much for your help.

squirrelonfire · 07-07-2008, 07:10 PM

Could you send me that private message too? I have the same problem w/ the top 2 screws !!!

**JOE55** · 07-08-2008, 01:52 PM

http://www.benzworld.org/forums/w210...in-filter.html

mikchr · 07-25-2008, 01:49 PM

I have taekn out all the screws, but the box seems to be fastened on the top center.
yes i took out the lamp and the screw that holds the latch and two on either side of the lamp. What am i missing?

jmfulkerson · 07-26-2008, 05:08 AM

hi all,
I recently changed the oil on my first E320, a wonderful car then found out that the recommended method is to evacuate with a pump rather thne drain from oil pan. Now I have slow drip from the plug that I have tightened as much as I "feel" I can without worry that I might strip it. does any know the tourqe settings for this plug so I can tighten to specs and ensure that its the plug and not another soruce of a leak. I do all my own work so please do not respond with a dealers number. thank you

FrankiE55 · 07-29-2008, 07:43 AM

did you replace the crush washer when you put the plug back in? If not that is your problem.

jmfulkerson · 08-23-2008, 02:11 PM

Hi frankie ,

thats it, will order it today thanks