Mercedes-Benz Forum banner

Fitting a kompressor to a N/A C180?

2K views 2 replies 3 participants last post by  pedro07 
#1 ·
Hi guys.

I have a C180 W203 2001, I would like to know whether a Kompressor could be fitted to this engine?
Right now it is a normally aspirating 2.0L engine.
Has anyone done this before?
What are the modification steps?
Does it require re-mapping of the ECU?
Where can i find a mod kit like this?

HELP PLZ>>

@mith:)
 
#2 ·
An aftermarket turbocharger setup for you is the easiest option, otherwise, you will expect to swap out the harness, and about 50% of your engine's internals.

Sure it can be done, and if I had to do it, well, I'd go two routes:

Buy a Komp car
OR
buy the entire engine, wiring harness and ECU from a Komp.

I'd rather buy a new car than swap the motor and have to rig up the electrics. However, on the 2.0 NA motor, there is a LOT of room for a nice small turbocharger, which will give you the power you are looking for, and a lot less hassles.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top