Lorinser RS4 wheel available to fit in silver or chrome finish:<br> <br> SLK-Class R170 chassis<br> C-Class W202 chassis<br> C-Class W203 Sedan chassis<br> C-Class W203 Coupe chassis<br> CLK-Class W208 chassis<br> <br> Why not M-Class? They are 18''. I guess it wouldn't look good.
I personnally think they look alright.<br>
<br>
I have been searching months for custom wheels to put on my ML430. There just isn't very many wheels available, probably due to the capacity rating of most wheels and the offset required by the ML.<br>
<br>
So far, I could only find these:<br>
<br>
20''<br>
Brabus IV<br>
Lorinser RS3, LM3<br>
Antera Type 301<br>
Dronell BP<br>
<br>
19''<br>
Carlsson 2/5 Brilliant Edition (older model in 20'' and 18'' has been discontinued)<br>
<br>
18''<br>
Brabus IV Multipiece<br>
BBS RXII Multipiece<br>
<br>
I think the 20'' look the best but the ride with such a low profile tire is questionable. I would like to try 19'' with the Michelin Diamaris but can only find the Carlsson 2/5 fitment. I heard that the older 2/5 were manufactured by OZ and the new ones are made by AT Italia, with the finish questionable.<br>
<br>
If anyone has any other suggestions, I am all ears.<br>
How about this wheel? I was also looking for the older version of 20' Carlsson 2/5, but unfortunately it's been discontinued. I found the wheel below and the wheel set with tires was pretty cheap for 20*9.5' wheel (I can get either scorpion zero or toyo proxes S/T, size 295/45-20 for tires). The salesperson told me that the whole set was $2500 delivered to my door. I did not order it, because I am just not sure about the quality of the wheel and how it looks on an ML. However, recently there was a post on this forum about the Demec's ML using these wheels. They look pretty nice. <br><br><img src='http://picturemanager.mbnz.org/uploads/pics/26jpg.jpg'><br> <br> <img src='http://picturemanager.mbnz.org/uploads/pics/mlbfrojpg.jpg'><br>
Linear Mode
