Mercedes-Benz Forum banner

no videos anywhere on heater tee replacement?

2K views 22 replies 7 participants last post by  Nate D. Rector 
#1 ·
Can't believe this,after 10 years I wan't to replace it.
 
#2 ·
if you are installing turbos/inter-coolers/super-chargers, or some other whiz-bang apparatus on your S320, you will do just dandy with-out the video :grin:nerd

Here is the link on the tee:

http://www.benzworld.org/forums/w140-s-class/1320788-evil-lurks-under-hood-really-devil.html

The actual tee is made by Rein(German Made), and AutohausAZ sells it. Someone said they bought a URO and lasted 6-months :nerd

http://www.autohausaz.com/pn/1408301696

While you are changing tee's. Change the front one too...

http://www.benzworld.org/forums/w140-s-class/1719760-another-coolant-fitting-breaks.html

You are an intelligent person. You will get it

Martin
 
#6 ·
Sorry to hear that about your back.

I find it easier to raise the hood vertical 90 degrees

Remove the large hose from the block that goes to the tee is what I find easier as that hose is all beat-up...

The little hoses at the tee one will struggle, but wicking-around a long flat screw driver in the hose will help in breaking the seal on the tee...

Anyways, those are my pointers...

All the best,

Martin
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top