» Site Navigation
» Other Sites
Google Links

» Log in
User Name:

Password:

Not a member yet?
Register Now!
» Wheel & Tire Center

Sponsors

Sponsors


Go Back   Benzworld.org - Mercedes Benz Discussion Forum > Mercedes-Benz Sedan Forums > W140 S-Class
Register Home Forum Photo Gallery Active Topics Blogs Search Today's Posts Mark Forums Read


       
Reply
 
LinkBack Thread Tools Display Modes
Old 05-11-2008, 12:19 PM   #11 (permalink)
saleem3
BenzWorld Junior Member
 
Date registered: Apr 2008
Posts: 5
Post Diagnosis

Gents,

I have just received a diagnostic report from the Mercedes independent garage in relation to the idle, below is what was diagnosed.

1. Computer check - several codes, but apparently no problem came out from the computer.

2. I was told they manually inspected the car and they recommended that the following parts be changed:

a. induction hose,
b. inlet manifold gaskit,
c. T.C gaskit x2, and
d. actuator gasket x2,

Also, was told that the following are the parts (part numbers in brackets) that will be required:

a. C.Y head cover gasket (part no. A120 010 01430),
b. gasket (A120 141 0280),
c. gasket (A104 141 0780),
d. pipe (A1200 102070),
e. hose (181382),
f. breather pipe (2532), and
g. engine pipe (3212)

The work has been estimated (parts and labour) to be around $936. However, they don't know if it will solve it 100%.

Should I get a second opinion?

Any help appreciated.

Thank you all in advance.
saleem3 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-11-2008, 06:05 PM   #12 (permalink)
bayhas
BenzWorld Elite
 
bayhas's Avatar
 
Date registered: Oct 2005
Vehicle: 300SE 3.2L DOHC, 190E 2.3L SOHC, Saturn SCX 1.9L DOHC.
Location: Framingham / Boston - MA
Posts: 2,610
Send a message via MSN to bayhas Send a message via Yahoo to bayhas
Quote:
Originally Posted by saleem3 View Post
Gents,

I have just received a diagnostic report from the Mercedes independent garage in relation to the idle, below is what was diagnosed.

1. Computer check - several codes, but apparently no problem came out from the computer.

2. I was told they manually inspected the car and they recommended that the following parts be changed:

a. induction hose,
b. inlet manifold gaskit,
c. T.C gaskit x2, and
d. actuator gasket x2,

Also, was told that the following are the parts (part numbers in brackets) that will be required:

a. C.Y head cover gasket (part no. A120 010 01430),
b. gasket (A120 141 0280),
c. gasket (A104 141 0780),
d. pipe (A1200 102070),
e. hose (181382),
f. breather pipe (2532), and
g. engine pipe (3212)

The work has been estimated (parts and labour) to be around $936. However, they don't know if it will solve it 100%.

Should I get a second opinion?

Any help appreciated.

Thank you all in advance.
if they are not 100% sure these parts will solve the problem, why are they thinking they need replaced?

timing cover gasket does not cause the engine to misfire, but causes an oil leak. is your car leaking oil?

he found codes? what are they?

valve cover gasket is the same way, the M119 and M120 are not sealed engines, and a leak in the upper section (valve compartment area) does not cause misfire like in BMW.

my opinion is this mechanic is experimenting in you, your car has 10000 miles, so the gasket didnt get enough heat to crack.
__________________
Mercedes-Benz, W140 S class 300SE

Mercedes-Benz, W201 190E 2.3 Stock

1996 Saturn SC1 + 95 DOHC head + 96 camcover + 98 Vsprings + 02 block + 00 crank + 91 header + 01 MP2 = SCX - Soon to be turbocharged.
bayhas is offline   Reply With Quote
Old 05-12-2008, 02:51 AM   #13 (permalink)
saleem3
BenzWorld Junior Member
 
Date registered: Apr 2008
Posts: 5
Bayhas, thank you for the prompt reply.

The car does not leak any oil.

I have my suspicions about the mechanic. Anyway, I will scan a copy of the computer report by this afternoon and I should appreciate if you would kindly let me know what you think.

Regards,
Saleem
saleem3 is offline   Reply With Quote
Old 05-14-2008, 08:22 AM   #14 (permalink)
saleem3
BenzWorld Junior Member
 
Date registered: Apr 2008
Posts: 5
Codes

Attached is a print out of what the garage gave me. I've tried to summarise the codes below:

LH1 - diagnosis: 0/02
013 Intake air temperature, sensor B17/6

LH2 - diagnosis: 0/02
013 Intake air temperature, sensor B17/5

EZ1 - control unit does not answer

EZ2 - diagnosis: 0/01
No fault stored

EFP - diagnosis: 0/00
160 Engine speed signal

GM - diagnosis: 0/00
No fault stored
Attached Images
File Type: pdf dd.pdf (159.4 KB, 10 views)
saleem3 is offline   Reply With Quote
Old 05-14-2008, 04:58 PM   #15 (permalink)
bayhas
BenzWorld Elite
 
bayhas's Avatar
 
Date registered: Oct 2005
Vehicle: 300SE 3.2L DOHC, 190E 2.3L SOHC, Saturn SCX 1.9L DOHC.
Location: Framingham / Boston - MA
Posts: 2,610
Send a message via MSN to bayhas Send a message via Yahoo to bayhas
the codes you are pulling have nothing to do with the repairs your mechanic is suggesting.

the air temp sensors are 10 bucks a piece... and you can replace them with absolutely NO TOOLS...

tell your mechanic where to put the engine pipe... BTW... what the hell is an engine pipe??
bayhas is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Benzworld.org - Mercedes Benz Discussion Forum > Mercedes-Benz Sedan Forums > W140 S-Class



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Topic Author Forum Replies Last Post
500 SEC Rough Idle Minkoff W126 S,SE,SEC,SEL,SD,SDL Class 8 01-04-2006 01:58 PM
500 sec rough idle zulumack W126 S,SE,SEC,SEL,SD,SDL Class 3 12-23-2004 05:59 PM
88 560 sec rough idle tommtkw General Mercedes-Benz 2 05-11-2004 11:34 PM
Newbie needs help! Hard start and rough idle. djimmy31 W124 E,CE,D,TD Class 1 09-14-2003 02:53 PM
Slow/rough Idle for 85 SEC Guest (MBNZ) W126 S,SE,SEC,SEL,SD,SDL Class 3 04-04-2002 05:42 PM

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -7. The time now is 01:53 AM.



Content Relevant URLs by vBSEO 3.0.0 RC6