Mercedes-Benz Forum banner

crankshaft vibration damper removal

2K views 2 replies 3 participants last post by  mountainredneck 
#1 ·
Hi
having a bad time removing damper . Remover six bolts holding damper to hub.
This is not going to pry off . Cant use puller as would damage rubber backing. Anyone had experience getting this off without causing any damage? Thank you Karl
 
#3 ·
been there done that, i used just a regular harmonic puller. probobly could be rented at parts store. mine was a b#^%h to get started coming off. a old trick we used in the past is to put your socket on the bolt and with a rachet and cheater bar, position it in such a way as to use the starter to loosen the bolt. careful...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top