Date registered: Jul 2010
Vehicle: 1967 250SE (W108)
Mentioned: 0 Post(s)
Quoted: 4 Post(s)
I noticed yesterday that the kickdown stopped working.
Got under it today and unplugged the switch, then jumpered the plug (bypass the switch). When I turn the key on, I can hear the solenoid click.
That tells me the solenoid is good and I'm getting 12v to the switch.
To test the switch, I hooked up the dvm to it and there is continuity when the switch is depressed. Also tested with a separate 12v supply and a test light.
So it looks like the switch is ok.
Yet when everything is plugged in , turn the key to start and press the switch, I don'y hear the solenoid click.
What am I missing?