Date registered: Oct 2012
Vehicle: 1968 250S, 1991 300se, 1998 SL500, 2x 1977 450SEL 6.9. Past MB's; 300SD, 300E, 300TE, 190E, ML420
Mentioned: 5 Post(s)
Quoted: 405 Post(s)
Inspect your brake pads and associated hardware. Front and rear. Make sure your calipers are not seized. Change your brake fluid, this is suppose to be done every 2 years.
Do a complete chassis lube and inspect your front suspension and steering components. While down there check your front subframe mounts.
Any zirk fittings that wont take grease, replace so they do. The old grease gets real hard, also spray wd40 in the hole when you remove the zirk, that can start the loosening process.