Date registered: Jan 2007
Mentioned: 2 Post(s)
Quoted: 82 Post(s)
I suggest a fuel volume test. Disconnect the return line from the regulator where it attaches to the steel line, slip a hose over it, put the end in a container and run the pump for 15 seconds. You should see a liter of fuel. While you have the line disconnected, blow out the return line with compressed air.
There is a huge amount of information about the 130 on the Pagoda site,
Falls Church VA
Last edited by ctaylor738; 03-23-2014 at 10:53 AM.