Hi guys, I took off my wood dash yesterday. I have attached 2 photos of where the nuts are.
First of all, I'm from England so my car is a right hand drive But believe the nuts will be in the same place on the reverse.
The 2 photos show the wood on the drivers side and the small piece next to the glove box. The glove box itself doesn't need explaining, that should be simple enough.
They are small 9mm or 10mm plastic bolts, you will only need a socket plus the extender, there is no room to maneuver the handle. You will have to rotate the extender with you fingers.
I did it by laying on my back in the footwells and reaching into the dash from behind.
It is hard and took about 1 to 1 1/2 hours.
Heater vents twist out from behind but be careful as they are attached to the lever which controls the heat which comes out of that particular vent.
Any questions please. Will try to get back asap.