BenzWorld Senior Member
Date registered: May 2007
Vehicle: 64' 220SEc, 72' 300SEL 6.3, lots of parts
Location: San Diego/Spring Valley
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
North Shore, what is the water temperature ?
Go with the original Solex from Necro,
the Zeniths were too big for the 220 motor
only on a 2.8 liter for those.
The "machine shop" consists of a flat piece of 1/4" plate glass and some 150 grit wet-or-dry paper with WD-40. rub until flat , you will see the distortion about the fastrening screws, and a thorough cleaning afterwards. All mating surfaces, the only real distortion is in the top plate of the Solex.
(former "professional" machinist jet engine overhaul)