Date registered: Feb 2010
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Well, after some coffee I went back to the car and saw that the combination switch was easily accessible behind that rubber on the arm/shaft. Turns out a loose red wire is why my wipers are gone. I confirmed with a jumper that the switch works fine...just needs to be soldered back in place.
Regarding the horn, yes those are the contact points for the horn but even with the wires completely disconnected my horn goes off. The way it is wired, it gets current to the horn and completes to ground via the switch. the short for the horn is going to be not that easy.
Former MB: "Miss Juliana" - 1972 280SEL 4.5
Current MB: 2013 C250