Date registered: Oct 2004
Vehicle: W123 280E
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
RE: 1971 220 d
For the antenna cable:
Remove the rear seat. Just pull up from the front side and throw it out. The back rest is fastened with 4 bolts if i remember right... Two bolts are at the lower front part, two are in trunk at the upper part (not sure).
There is a hole at left/right side, you'll find it ;).
You can weld a new part, trunk lid is regular steel. The heat can deform the lid of course, so be careful and weld slowly and cool down the metal right when welded.