Problem with VITO central locking and air suspension fuse

[Adrian_86]

Hi.
I have a 98 Vito and I need some help.
I borrowed the car to a friend and he had had some problems with the central locking (slide doors didn't lock) so he removed the fuse. Now I want to fix it but he doesn't remember witch fuse was it. If someone could show it to me I'd be grateful (put photo here) And if someone has an idea what could be wrong with the slide doors that would be great

Second problem is with the air suspension (I think that's what you call it); I'm in Croatia now, the roads here are very bad, and the fuse for the air suspension dies almost every day. People told me it's normal because of the roads, that the compressor is working too much but I'm not so sure it's ok...
Any ideas?

That's all 4 now. Thx

[adamuk]

My vito manual says: Fuse f4 in the fusebox in the passenger side footwell, 15A.

[manroti]

Vito Fuse Box is under the front passenger's seat (right hand drive)....If the Air Suspesion fuse blow change it to 30A. If you want to disable auto levelling just push the levelling switch and hold them for 5 second until the autolevelling suspension light stop blinking. if it doesnt work, try change air suspension to normal spring suspension as being used by Vito Commercial vehicle. it fits like a glove but the ride is a bit (50%) harder... less headache...

For central locking, the central locking mechanism in the sliding door always got problem....the internal plastic mechanism is fragile. if you lock them by pushing the door trigger it will easily break. Try not to push the lever but instead use the switch instead. mine i just change it to new lock and modified the lever a bit so it could not be push manually but only operated via remotely at the dashboard.

[Adrian_86]

My fuse box is under the driver's seat. I'll take a look later.

BTW; could someone put electrical scheme here? I need it

[adamuk]

I think there's up to 3 fuse boxes in the vito... Mine has 2 as there's none of the fancy stuff.

[hoodoo]

Hi,
I have vito 110 2000year. Can't find why passenger side door not working fuse is ok, Please help me.
Thank you

[prossett]

If you cannot find the answers when searching the forum, you need to give more exact information. Not locking? Not unlocking? With remote? With pressing the lock button by hand, etc.

You posted on a thread from 2006

[hoodoo]

Originally Posted by prossett

If you cannot find the answers when searching the forum, you need to give more exact information. Not locking? Not unlocking? With remote? With pressing the lock button by hand, etc.

You posted on a thread from 2006

Ok sorry for my english I'm from lithuanian.
Door lock not working:1. when you push driver side handle 2. when you use remote control 3.when you press special button for lock and unlock doors.
it's not working at all.
I change new central lock motor but it still same.
Maybe someone has central lock wiring diagram?

[Matelot]

If the door locks when you do it manually, from the passenger's side, it may be a broken wire.

Check the wires that pass between the body and door. They pass through a rubber sleeve which will have to be pulled aside or cut open.

It's a common area for failure and well worth looking at.

Good luck.

Rob

[prossett]

No worries. I've only dealt with the rear door not locking because it was sensing it open, so I'm not sure about your Vito problem, but I'm sure you can find info on this forum. If it's all doors, your problem is different, and it's prolly the central locking not the door locks.