I am for the most part a lurker on this site. I apologize to the mods in advance if my post is a TOU violation. Thanks for looking:
OK. I was told by the boss that before I buy anything else, I need to get rid of some stuff. So, Here we go…
Power Folding Mirrors 211
This was supposed to go onto my 211 E55. I never got around to installing them. Comes with the switch. If I recall correctly, you need STAR programming to make them auto-fold. Please do a search for more info.
RENNtech Monolites (staggered)
19 x 9 (ET30) 19 x 11 (ET39)
Yes, you read correctly. This set DOES have an 11” REAR. I’ve heard from RENNtech that this was a limited production set. Bridgestone S03s w/some tire life left (fronts are better than the rears). I need to check the tire specs when I get home. I had these on my 211 E55 and the 11” rear did NOT rub. However, the car was NOT lowered. NO bends, but, there are curb marks here and there and the RENNtech sticker on 1 or 2 of the wheels is partially gone. Comes with RENNtech center caps. These wheels would fit a SL as well. Link to the RENNtech and Kleemann pics: MBWorld.org Forums - View Single Post - E55 Picture Thread
RENNtech Monolites (non-staggered)
19 x 9 (ET39)
Yokohama Advan ST, 285/45/19
This set was on our ML55. No bends or curbs however the lips could use a polish. Comes with MB center caps. This set should fit the big body MBs like the S, and CL.
Partial pic of the ML w/ the wheels on:
RENNtech CF airbox w/ Green filters.
This is off our 208 CLK55. It should bolt right onto a 210 E55 and a 202 C43 as well. Other MB V8s might work with some mods. There is a slight scrape/blemish in the clear coat at the center of the box.
This was off the 211 E55. Just painted 040 black, I believe it needs new adhesive for install. This has been sitting at my friend’s shop and he’s been bugging me to pick it up.
KLEEMANN TS-6 (staggered)
19x8.5, 19x10 ET36 w/ 2 spares*
These are also of my 211E55. Kleemann bolt-in spacers were used to achieve the proper offset for the front. These are included in the sale. Like new Vredstein tires. *1 wheel is bent and basically toast. The faces of the two spares need to be swapped and you will have a complete set w/ 1 spare rear wheel.*
Link to the RENNtech and Kleemann pics:
MBWorld.org Forums - View Single Post - E55 Picture Thread
20 x 10 (stepped lip)
This set is off our ML55. Tires are basically shot, but still mounted. There are no bends, however, the wheels could use a polish or refinish.
20 x 9.5 (reverse lip, staggered lips front/back)
I want to keep this set. It is basically flawless and the tires (Pirelli Scorpions) have lots of tread on them. They require a small spacer to fit the ML55.
19 x 8, 19 x 10
Off our 208 CLK55. Includes spacers for the rears. Perfect fit, no rubbing. I need to pull this set out and check on the condition. If I remember correctly, there are no bends, however, there might be some curb marks. I believe the tires are shot.
Axis Se7ens (3pc)
19 x 8, 19 x 10
Multi-piece set that was on Jon Pek’s 202 show car. We used it on the 208 CLK55, includes spacers for the rears. I need to double check but 1 or 2 of the fronts needs to be repaired due to a nice pothole. No tires.
HPS Gen 1 SC
It is used and off a ML55. To my knowledge has all the parts needed to install. I state this because I never got around to having it installed and it is still sitting in the boxes it came in. I might still use this on another car, however, for now it is just sitting there. If the offer is right, it goes.
Not sure if there is much interest in this; not sure why I kept it. I had airmatic failure on my front driver side shock on the 211 E55. I was told at the time that I needed to replace both. I want to say the part was $1100-ish each?!? Anyway, I kept the old parts. Driver side is “shot,” but, the passenger side was fine when removed.
I probably have some other stuff lying around (stock head units, 208/210 Euro Comand) and will update as I find it. I will also update the specs of the items when I have a chance to dust them off.
For those wondering, no, I don’t have an auto shop, store, etc. I’d like to sell some of this stuff so friends and family would stop giving me the WTF? look when they hear about the “collection” of car stuff. I haven’t listed prices; I think you guys know what this stuff is worth. That being said, I will listen to REASONABLE offers. I’m not going to insult you with an inflated price, please return the favor. Thanks for looking. Shoot me an email with offers and or questions. I will have tomorrow free to pull all this crap out for pics, etc. Buyer pays shipping.
Email: aintME @ gmail dot com