Originally Posted by ThrillKill
Aha! Now I recall, #12.
Originally Posted by Digmenow
Mod types: Please don't ID your own post but take your best shot at the others.
You color outside the lines, don't you?
Nutz 4 Benz
Originally Posted by 1
I think I may have solved it, although, I will really have to wait for more rain to be sure.
I wound up using a product called "Shower Power' which my wife uses to clean the haze off the glass in the shower.
I have wet down the windscreen after cleaning it with this stuff and it doesn't appear to have the greasy streaks on it anymore - but time will tell.
Don't know if that stuff is sold anywhere else.
Originally Posted by 2
Well. If you are in an running election, there is no law that says you can't vote for yourself.
Originally Posted by 3
Good grief, take a look yourself! If it's too much to ask to bend over and look at a brake caliper, what are you going to do when something serious happens?
On top of that, this is about the time when they switched from one to two pins, it would be hard for anyone to say without looking.........
Originally Posted by 4
Passing on costs is never an acceptable solution; however, not incurring costs (cost cuting) is. To pass on costs does not net the company any more, and the expense for the higher cost items is absorbed up front, with the return not coming 'til later. Sure, it is a wash, but still the coffers are deplete for a period of time, and interest on monies is lost and not recovered until the revenue stream returns.
Originally Posted by flyboyike Front rotors replacement
I was pretty surprised that Bob Hope himself died. I was under the impression that him and George Burns had a deal whereby one of them had to live forever, so when Burns passed, I fully expected Hope to remain indefinitely.
Originally Posted by 6
You can try stuff like Zymol Wheel Coat, which attacks the problem from the wheel wax angle, or try Kleen Wheels, which are vented and work well, although they may not look very good depending on the design of your rims, or try no- or low-dust brake pads such as ceramic (expensive and not recommended by DB) or Mintex (a Textar subsidiary).
Originally Posted by 7
If you plan on lowering the car have the shop check and lubricate all the bushings, control arm..etc.. also wait for atleast a week to let the suspension settled then get a 4 wheel alignment. Btw, what kind of lowering spring are you going to install?
Originally Posted by 8
Unless you have a VERY VERY good relationship with your insurer, do your homework and pull the prices of ALL 1995 W124s off of AutoTrader and Cars.Com and make up a spreadsheet with all the asking prices. This will start your basis for what YOU want to ask the insurance company to pay. DO NOT RELY on their little book and first offer. Also, get a second adjuster to value the car for YOU.
While we all think the Insurance Companies are out for our best interests, they are in business to cut the absolute smallest check that they can get away with. To that end they always use contract adjusters that are known to provide the lowest estimated values for totals.
Good luck on your settlement.
Originally Posted by 9
That estimate is waaaaay high. They're padding their pockets with about $4000 extra fluff.
That could be fixed for way less if you do a bunch of the work yourself.
Paint's probably going to be the most expensive part of it, usually running about $100 per square foot at a good shop.
Originally Posted by 10
You know,it's really the smugness of the diesel owners that bring it out of me part of the time and just to keep your game faces on the other times.
Furthermore,I do not attack individuals,just the diesel W123 in general which to take personally is quite asinine. Todays diesels are tomorrows gassers body parts
Originally Posted by 11
That was an unusual and strange race. Hamilton put on a flawless drive, and deserved the win.
Alonso's drive was disappointing, he did not show much grace under pressure.
A solid performance for little Nick Heidfeld, who had a chance to show his stuff, and I am happy for Alex Wurtz in third.
It has to be embarrassing for the Gentlemen at Toyota HQ, reportedly with the biggest budget in F - 1, to see their customer Williams do so much better on a small budget.
Anyone who ever worked with a large Japanese corporation and their 'decision by committee' style will understand.
Not much is to be said for Ferrari. I only hope it is not a return to Italian drama.
I wonder whether Luca di Montezemolo now doubts the wisdom of some of his decisions in regard to the Ferrari F-1 team.
Originally Posted by ThrillKill http://www.benzworld.org/forums/w208...nn#post2419041
P2017 Self adaptation of mixture formation from right bank1/2 of cylinder is at max/min limit at idle speed.
Don't know about the other one. May pertain to your cats or o2 sensors.
Did you clear the codes after changing the MAF?
I got similar codes when I put on my Eisenmann and the flow changed but they went away when the system adapted.