Date registered: Sep 2004
Vehicle: 1982 300SD
Location: Bel AIr, MD
Mentioned: 0 Post(s)
Quoted: 0 Post(s)
Does anyone have the wiring schematics for W126 seat switches?
I am trying to sort out the seat switches on my 1982 300SD. ( No memory/ no lumbar)
Driver's side--I broke the stalk off for the recline. I thought I could swap the post from another seat switch, but the inside of the seat switch for my '82 300SD has a different design than either the passenger side, or switches I got from a junk yard car. I cannot simply swap the broken switch post. Additionally, the switch is soldered to the wiring harness; there are no sockets to connect the switch to the wiring harness. Finally, there are 2 more wires ( red, and red w/ white stripe) in my car than on the later style switch w/ socket that I had hoped to replace it with.
Passenger side-- No function on recline, nor rear seat height. I have cleaned the switch as wellas replaced it w/ another switch w/ no change in operation.
Repair options. Has anyone drilled a tiny hole thru the center of a broken post and glued a tiny steel post inside the plastic one?
Thanks for any help!