Mercedes-Benz Forum banner

need help with Ignition diagram help

607 views 1 reply 2 participants last post by  leapyfish 
#1 ·
Hi, I have a 1973 450SLC W107. Recently I had noticed slight missing when either accellerating and again when idling. Then one day went to start car and didn't want to start at first, but eventually started. however, when placed into gear, car stalled immediately. placed car into Park and tried to restart - found that motor turning over but no start. Tried wriggeling the key in the ignition switch and it started. (suspect faulty Ign SW between Ign and Start positions) Car the went through its normal warm up period and fell back to idle mode but immediately stalled. Summarizing - Car stalls at idle or if placed into gear (even at revs).
Could anyone out there offer any advice ?
Also - Does the 450SLC have an external ignition condenser. none shown in Bosch catalogue for this model - I ask because mine has a condenser connected to the coil.
Could someone help with the Ignition diagram for this car?
Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top