Mercedes-Benz Forum banner

Becker radio not working

742 views 1 reply 2 participants last post by  redghost 
#1 ·
I pulled my 1989 300SE off the road for about 2 years. Battery died etc... Radio was working fine. I had work done on the car & it is now back in service. Scan does not stop on any stations, but I do get some static on am stations but not a peep on FM. I did replace the antenna a while back and if I touch the antenna the sound of the static changes so I am assuming there is connectivity. Any ideas?
 
#2 ·
The amplifier has dropped out of the system. It lives in the trunk on the passenger side wall. Silver box with a bunch of wires. I would pull it from the wall and reseat all the wires, after a shot of contact cleaner.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top