Mercedes-Benz Forum - View Profile: JamesDean

JamesDean JamesDean is offline

BenzWorld Elite

  Visitor Messages

Showing Visitor Messages 1 to 10 of 13
  1. SDFAN
    12-16-2014 12:45 PM - permalink
    SDFAN
    Mr. Dean, I have a cluster for a 1982 300SD with 129449 on the speedo. I ordered the wrong placement for my 1984. It has all the gages including the tack, clock, temp oil pressure, dimmer resister and fuel. The light bulbs are removed but the plastic light "baffles" look ok. I have unable to test it. There seem no cracks or on the panel or any on the case. Since you may have a couple of 1982's I thought might be get interested or some one else you could be have an interest. Let know as it may good to have spare.
  2. 86-300SDL
    04-30-2014 12:16 PM - permalink
    86-300SDL
    Hi,

    Re: 86 300sdl instrument clock capacitors

    Is the 100uF/35 the correct capacitor for this car?

    The clock has been dead for >10 years. Had taken it to the dealer and they wanted big bucks for the repair so I passed at the time.

    I'm pulling the instrument cluster to replace the bulbs this weekend and thought to repair the clock at the same time. It's my daily driver so I'd like to purchase the capacitors prior to pulling things apart.

    Thank you in advance!
    Rob
  3. aharrin1
    11-20-2013 07:03 PM - permalink
    aharrin1
    Hey JD, I am designing a digital data logger for my 1984 300SD. I know you do cruise control repair but do you know and/or have the pinouts for everything (not just cruise control) that connects to the back of the gauge cluster? Or if you know where i could find that stuff, let me know. Thanks!
  4. rob.thepvcman@gmail.com
    11-01-2013 12:22 PM - permalink
    rob.thepvcman@gmail.com
    I have an 87 300SDL that got fried by a bad alternator (Damn you AutoZone!). My speedo and cruise along with about half a dozen other electric/electronic items got fried. I know that the cruise gets its signal from the speedo, so should I wait until I get the speedo fixed before I get a new cruise amp from you?

    Rob
    (352)586-1839
  5. mercimania
    07-15-2013 04:46 PM - permalink
    mercimania
    hi 1993 s350 diesel cruse control dose not work what is the location , for the amp, actuator? it is not under the hood just a cable goes to the injector pump no old style actuator it is under the dash? call me at 206 551 9256 thak you for the help

    andy
  6. JamesDean
    06-06-2013 06:45 PM - permalink
    JamesDean
    Hey everyone! I do still work on cruise control units and would be happy to help you out! Just shoot me an email: JamesDean59@gmail.com!
  7. xboxissocool
    06-05-2013 03:26 PM - permalink
    xboxissocool
    hey i too woud like to know if you still worked on cruise controls..i have an automatic 1980 240d
  8. RabidDawg
    05-24-2013 07:23 PM - permalink
    RabidDawg
    Do you still work on Cruise Controls? Just bought a 93 300d that cruise control works sometimes. Thanks.
  9. RetroScott
    06-25-2012 05:44 AM - permalink
    RetroScott
    Hi JD,
    The cruise on my '91 2.3 works, but when it comes to an incline, it accelerates and keep accelerating, up to about 15 MPH over the original setting before it backs off. It really isn't useable. Any ideas on what might be causing this? Thanks In Advance, SK.
  10. Festool
    05-28-2012 07:06 PM - permalink
    Festool
    James, you mentioned if I had a problem with my cruise control you might have a fix? I haven't looked into it but it doesn't work. Ideas?

    thx for adbise on the shock by the way.

  About Me

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 12-15-2014 08:48 PM
  • Date registered: 01-03-2005
  • Referrals: 0

  Friends

Showing Friends 1 to 2 of 2
  • Biofuels4Change
    • Biofuels4Change is offline
  • vaccin
    • vaccin is offline

  Contact Info

Instant Messaging
Send an Instant Message to JamesDean Using...
Home Page
http://zerolimitdj.com
This Page
http://www.benzworld.org/forums/29450-jamesdean.html

  Mentions

No results to display...

  Thread Tags

12-04-2014
10:52 AM - howardeng tagged JamesDean in thread 1984 280ce euro heat issue...

  Quotes

12-09-2014
02:50 PM - StreekG quoted JamesDean in post Transmission 722.356 Why can't i find any info on it?
This seems contradictory. What...
09:48 AM - JamesDean quoted compu_85 in post AC Compressor PSA
On the 603 diesels there is a...
09:46 AM - JamesDean quoted StreekG in post Transmission 722.356 Why can't i find any info on it?
It works fine, mine is just ...
09:44 AM - JamesDean quoted MAYFAIR in post HOW TO TEST REV COUNTER UNIT WITH MULTIMETER
many thanks for reply all...
12-04-2014
10:59 AM - JamesDean quoted Shadowredlev in post Irratic cruise control/Idle and Ac problems
The thing that is weird is that t...
12-02-2014
12:03 PM - JamesDean quoted NewYorkS600 in post Outside Temperature Display Issue
If the capacitor is the problem,...
11:41 AM - JamesDean quoted NewYorkS600 in post Outside Temperature Display Issue
Is the capacitor within the temp...
11:39 AM - NewYorkS600 quoted JamesDean in post Outside Temperature Display Issue
If the replacement temperature...
11:07 AM - JamesDean quoted R.P. McMurphy in post Outside Temperature Display Issue
...wouldnt that depend on whether ...
11:05 AM - JamesDean quoted NewYorkS600 in post Outside Temperature Display Issue
what if i replace the temperatur...
10:14 AM - JamesDean quoted NewYorkS600 in post Outside Temperature Display Issue
How does one replace the capacit...
09:21 AM - JamesDean quoted NewYorkS600 in post Outside Temperature Display Issue
Here is a picture of how the tem...
11-26-2014
05:35 PM - Leidenschaft quoted JamesDean in post Aftermarket Suspension Component Quality
When I did my W124 you arrived...
05:26 PM - JamesDean quoted Leidenschaft in post Aftermarket Suspension Component Quality
If my memory is right I think the...
05:08 PM - Leidenschaft quoted JamesDean in post Aftermarket Suspension Component Quality
No, you're right its a kit tha...
05:04 PM - JamesDean quoted Leidenschaft in post Aftermarket Suspension Component Quality
Oh bushings. Thought I read that ...
05:02 PM - Leidenschaft quoted JamesDean in post Aftermarket Suspension Component Quality
Idler Arm bushings? I've got t...
05:01 PM - Leidenschaft quoted JamesDean in post Aftermarket Suspension Component Quality
Definitely stay away from Febi...
04:57 PM - JamesDean quoted Leidenschaft in post Aftermarket Suspension Component Quality
"Ha quoted me mid edit!" I'm ver...
04:55 PM - Leidenschaft quoted JamesDean in post Aftermarket Suspension Component Quality
Ha quoted me mid edit! Yes goo...
 

Title goes here

close
video goes here
description goes here. Read Full Story
For the best viewing experience please update your browser to Google Chrome