| Just a followup to the Germanex story.
After having the top installed, by one of the best in the area and has been doing this for 40 years, it appears the top is a little out of square. The seam across the back bow runs straight down the middle of the bow. The stitching across the top bows are dead straight. However, the welting where the top does the L shape transition from the top of the window to the front frame is over the chrome on the Passenger side and behind it on the Drivers side. A difference of say a half inch.
Germanex's response is that they've done 10K of these and they are all cut from the same computer so it's my installers fault. There is nothing he can do.
sorry nobby -- but I have to use the CAPS
STAY AWAY FROM GERMANEX
__________________
Mike   |