| Well another question. I am attempting to hook up a hydraulic circuit from the under mounted Case pump. The flow lines(in and out) were linked with a quick coupler so I split this and routed them in and out through a dual valve to run 2 independent cylinders with lines running accordingly. Here's the question. It appears that there is an in line pressure dump valve on the inlet side and I have narrowed my problem of not having enough power to run the cylinders to a faulty pump or this pressure dump. I really don't understand why this is inline here?????? My valve assembly has a pressure relief set around 1850psi, couldn't this be eliminated even for a short period to check to see if it is indeed the pump defective or the dump valve?
MUD
__________________
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways - Beer in one hand - Blonde in the other - body thoroughly used up, totally worn out and screaming Wooooo Hooooo what a ride".
|