Quote:
Originally Posted by Dog Taxi  I wonder if I have the right shaft? |
G'day again Jeff,
You have the right shaft, but only half of what you require. Just been out and checked mine and the shaft you have is the section from the PTO drive at the G/B as far as the male spline that mates with your missing section. This comprises a second UJ with a female spline, the bearing housing and equipment drive spline (coarse). I've also checked my rear PTO and the bearing housing looks identical (but you can't have it).
If you look at Jorgens arrangement you can see the spline attaching the UJ at right of picture. Mine just happens to be assembled the other way with the splined UJ bolted up to the bearing housing.
Unless you want a different drive to std I think it would be easier to just hunt up a front or rear bearing housing and have a bolt on solution.
Cheers and luck with the HC head
Tony