Quote:
Originally Posted by isarescu  Checked! I guess this is where it leaks from and it goes along the wires. What to do next? |
What Baz said..........here are a few links for more info.......
http://www.benzworld.org/forums/r170...l-leakage.html http://www.benzworld.org/forums/r170...#37;2C+Project http://www.benzworld.org/forums/r170...e-control.html
Suggest a very close look at the electrical connector on the Cam Adj Magnet......any sign of oil (even just moist) would indicate the need to check along the wiring loom.....oil on the outside of the loom/plastic tracks would suggest following Linh's advice......oil inside loom would almost certainly be coming from a leak in the electrical connector of the Cam Adj Magnet
......I know it is hard to believe, but oil can wick along this loom to the ECU and cause very expensive damage
.....if you find any oil in the loom then it may have to be replaced along with the Cam Adj Magnet
....there is also a wiring loom modification to protect the ECU etc. from future leaks (info in above links)
Good luck
David