| At the rear of the block, on top....it is a green colour with two prongs sticking out. It is the only green coloured sensor on the block.
A 22m deep thin wall socket will be required to remove.
If engine is hot when removing, release the water system pressure by opening the rad reservoir cap half-turn.
The cold start valve is located between injectors 3 and 4 on the intake manifold and is simply removed by removing the 5mm allen bolt. The electrical plug simply unclips off and the fuel line is undone using a 12mm or 14mm spanner. Remove the fuel line before removing the 5mm allen bolt holding down the injector.
Talbir
__________________
Mercedes w124 500E 1993 Black 040
Mercedes w124 500E 1992 Silver 744
Mercedes AMG 560SEC Option 822 1988
Mercedes AMG DOHC M117 w126 AMG Widebody SEC 1985
Mercedes 560SE Carat Duchatelet 1987 Option 822
Mercedes 500SEL Brabus
Mercedes 300TE - Carlsson
Porsche 911 Turbo SE Slantnose 1986
Mercedes 560E - w124 5.6 DOHC 360bhp by Stratton
Ferrari 328 GTS Quattrovalvole 1986 Koenig Widebody
|