View Single Post
Old 04-17-2008, 05:56 PM   #6 (permalink)
FrankW
BenzWorld Elite
 
Date registered: Aug 2005
Vehicle: 02 C32, 08 C350, 00 CLK320 (sis'), 01 ML430 (gone)
Location: SoCal
Posts: 1,352
Send a message via AIM to FrankW Send a message via MSN to FrankW
they can all by DIYed.

you can drain the brake fluid from one of the brake line at the caliper, but you gotta know what you are doing.

drain for the coolant is on the bottom of the radiator. probably better if you remove the bumper first so it's easier to work with.

oil change's just oil change.take off the underbody cover, drain the fluid, change the oil filter, re-fill the oil.

doing all these just make sure you have all the proper tools. if not or if you are not confident enough just leave it to a shop to do it. dealership always over charge you on labor.

I wouldn't do a coolant flush btw. a lot of times they use cleaners that are really abrasive in the system. you don't really want that to happen and causing future problems.
__________________


2002 M112K with lots of mods
2008 M272 with some mods


to do list: install heat exchanger for m112k.
FrankW is offline   Reply With Quote