Quote:
Originally Posted by dboskovic  Thats true. Where does the connector for the aux in go, in the glove box? Is it a RYW component connector?
Thanks again, I can't wait to get mine going, only thing I'm worried about is the tight squeeze because I have the ipod adapter as well but I'll just take my time with it.
Regards,
Daniel |
I am not going to lie...it is a VERY tight squeeze...but be patient....
TJ will walk you through it..but be sure to tell them that you have factory ipod, because instead of inserting the T-harness behind the radio..you put it in between the ipod harness and the existing radio harness. Once you get your hands in there, you will see. If you go with the aux in, be sure to tell them to give you at least an 24" extension with FEMALE connectors. I ran them over to the glove box and drilled a hole in the right hand side. I fed the three female connectors through the hole and there they sit. I have attached a photo of it. I ran the AV cables out through the back of the radio area, under the glove box and around to the side where I drilled the hole.
TAKE YOUR TIME and you should be OK.
Haze