| Hi George,
Check your WIS sheet, it has a good pic of the filter element and canister.
If you can read this post completely most of these questions should be well explained.
The canister that holds the filter element is all plastic and the nut to remove it is molded into the top.
The size is 1+1/16" socket (or 27mm) I forget the size of the drain plug but maybe Guenter remembers. It might be 13 or 14 or 15mm. It has a copper washer, making it different from other bolts in the pan area.
When you see it, all becomes obvious.
Good Luck, Derek |