| BenzWorld Member
Date registered: Mar 2007 Vehicle: SLK 230K BRABUS now, Mercedes 190E 2,3 16V,SMART BRABUS,BMW E39 M5,E31 850i,E32 750i,etc (all ex) Location: Europe, sLOVEnia
Posts: 221
| Quote:
Originally Posted by Steve Johnson  For those 98-99 230's I need the size of the blower pulley. I know Snogard runs the 80mm Brabus blower pulley and I need to know the size of the OEM pulley. M45 is 2.75 and can only run a 2.65 and that is only after blower snout is turned down! 4% power increase from running the smaller pulley on the M45! |
Steve, 80mm written in my signature is my typing mistake. In fact my BRABUS K1 wheel have diameter arround 91 mm, and diameter of OEM stock pulley is 100mm at the belt line. If you want, i can measure EXACTLY diameter od OEM pulley and K1 pulley, as i have both of them at home.
__________________
BRABUS:
-susp.
-18"MonoblockIV
-body
-hand brake
-roll bars
-K1S kit
-IC
-exhaust
FT crank pulley 225mm
double RAM-CAI
K&N
Custom intake ALU(SC to IC & IC to TB)pipeing
New M62(0,7bar/2000rpm&1,05bar/5500rpm)
Ported SC outlet&inlet
Elim.MAF&TB screen
4BAR FPR
SS headers(thermotec wraped)
Servo pump&Alternator UD pulleys
C55AMG Fr.brakes(Brembo345mm/4piston)
SLK55AMG Re.brakes(Brembo330mm/4piston)
SS brake lines
17mm spacers 4x
Wiechers chassy reinforcement
| 
