[Kynyption]

Fuse Designation USA
Cover Part No. 201 540 03 82

1
Blue
Blower Motor, Air Condition Compressor, switch over valve idle stabilization, relay auxillary fan term. 86, control unit/ water pump/ climate control system

2
White

3
Red
Auxiliary Fan

4
White
High Beam right, High Beam Indicator

5
White
High Beam Left

6
Red
Heated Rear Window

7
Red
Window Lift front left, rear right

8
Red
Window Lift front right, rear left

9 (bridged with #10)
Backup lamp, stop lamp, instrument cluster

10
Red
Electromagnetic clutch engine fan, emission control, washer nozzle heater, tach, cruise control, outside mirror, temp gauge outside, (seat heating front)

11
White
Turn signal lamp, horn, warning monitor term, 8, control unit/switchover valve climate control system

12
White
Roof light rear, central locking system, (relay seat adjustment term.86)

13
Red
Diagnostic, hazard warning system, clock, trunk light, roof light front, illuminated vanity light, radio, automatic antenna

14
White
Parking/tail light right / warning buzzer, license plate/ instrument /hazard warning switch/ heater and ventilation controls illumination (rocker switches/ shift plate/ radio illumination

15
White
Parking/tail light left

16
White
Fog light

17
White
Low Beam right

18
White
Low Beam left

19
Red
Cigar lighter, glove box light, switch heated rear window, radio, sliding roof

20
Red
Windshield wiper and washer, optical horn

8A White
16A Red
25A Blue

Removing the box cover can perplex the first timer . . . First, unlatch the front cover latch, then use a flat bladed screwdriver to pry the large metal rear latch up. Then pinch/squeeze the large metal rear latch to disengage it from the hinge. Lift and angle the cover forward, towards the engine bay, and you should be able to remove the cover with resorting to a torch and cutting attachments on the dremel . . .Thanks to MTI from 190revolution.net