There has been questions in the past about adjusting the window up limiter to keep the window from rolling up too far. The picture shows the location of the up limiter. The (marked in red) nut is attaches to an L bracket that contacts the lower stop lip on the window lift . The problem is that the L bracket will become bent and on longer contact the window bracket. If this is the case the L bracket must be removed and reshaped to contact the window stop. Once the L bracket is back the correct shape reise the window to the proper hight and tighten down the the adjustment nut. Note: If you going to put any parts of your body inside the door where the window regulator runs up and down, disconect the battery first.
