Quote:
|
Originally Posted by Winston I assume you must have checked the bolt that holds the half axles to the wheel. If not look at it for looseness....remove center cap from the wheel and check for tightness. Mine actually came loose but we just added some locktight and tightened it. Hope you make it back safe. |
Well this morning I pulled off the little plastic center cap to the alloy wheel to check on the whell nut as Winston described above. It was not loose to the hand but I put a 13 mm ratchet on it and I could tighten it by at least a 1/2 half to 3/4 turn. I checked the other side and it was tight. I then took the car for a test drive to see if this made any difference and the noise was still there but seemed toned down somewhat.
Tomorrow is the big day and I will take a chance on taking the veh. for it's return trip.I will report back on my adventure.