Benzworld.org - Mercedes Benz Discussion Forum - View Single Post - Correct lug bolt for W211 stock rims for W210 application

Raylee177 · 02-14-2006, 06:37 AM

I don't believe you will have problem. You can ask Otis Inc. directly yourself. If you take genuine MBZ stock lug bolt 14 X 1.5 X 21 (Thread Lenght,same as 26mm shank lenght)and cut them down to 12mm, it is going to cost you about $11 each X 20 lug bolts. It turns out pretty expensive.
You have seen some people cutting original MBZ 14mm lug bolts down to 12mm and are using successfully. But that route is lot of headache and expensive as you can see. Anyway, that is a proof that it does work, right?
Going with RAD will cost you about $60.00 total(20 pieces) including shipping.
Here is the telephone NO you asked for; 310-995-8939

02-14-2006, 06:37 AM	#8 (permalink)
Raylee177 BenzWorld Member Date registered: Mar 2005 Posts: 383	RE: Correct lug bolt for W211 stock rims for W210 application I don't believe you will have problem. You can ask Otis Inc. directly yourself. If you take genuine MBZ stock lug bolt 14 X 1.5 X 21 (Thread Lenght,same as 26mm shank lenght)and cut them down to 12mm, it is going to cost you about $11 each X 20 lug bolts. It turns out pretty expensive. You have seen some people cutting original MBZ 14mm lug bolts down to 12mm and are using successfully. But that route is lot of headache and expensive as you can see. Anyway, that is a proof that it does work, right? Going with RAD will cost you about $60.00 total(20 pieces) including shipping. Here is the telephone NO you asked for; 310-995-8939