[Vincent R]

Problem Description: 3rd Brake Light Bulb Failure
Problem Cause: Condensation / Dirty Bulb Socket
Solution: Clean socket/bulb connectors with wire/pipe brush or sandpaper

Dealer changed the bulb ($15ea) several times and then recommended replacing the socket at a cost of $100. Turns out the connectors were dirty/slightly corroded and weren't making proper contact with the bulb.

Time to do: 5-15 minutes
Tools needed: thin wire/pipe brush, pic or long nose pliers to adjust/bend bulb socket connectors
Level of difficutly (1-10): 0