| RE: Steering Wheel Swap, step by step (Part III)
STEP SEVEN. Support the new wheel and feed the wires back through the same hole. Line up the wheel and place it in position, securing it with the retaining bolt. 60-70 ft. lbs. should be fine; once the taper seat hits, torque will rise dramatically.
STEP EIGHT. Reinstall the airbag assembly, connect the general connector first, and then the airbag connector. Align the airbag assembly into place and start the two screws, then tighten them.
STEP NINE. Close the doors and reconnect the battery. Replace the plastic cover.
STEP TEN. Go through the manual's procedures to correct the malfunction warnings, reset the power windows and enable your radio.
STEP ELEVEN. Go for a drive, enjoy the new feeling! | 
