| RE: Steering Wheel Swap, step by step (Part II)
STEP FOUR. Gently pull the airbag assembly away from the steering wheel and rotate it as in the picture. Pull the yellow airbag connector straight off the airbag and then disconnect the other connector. Remove the airbag assembly and set it somewhere safe.
STEP FIVE. Use a 10mm allen-head socket to loosen the steering wheel retaining bolt. This bolt has a tapered seat and will be very tight to break loose. Don't use the steering wheel lock but rather have a helper hold the steering wheel while you loosen it. When the bolt is quite loose tug on the steering wheel; it should slide forward. If not, have the holder pull on it while you use a small piece of wood and a hammer to strike a blow to the retaining bolt. Don't hit your helper!
STEP SIX. With the wheel able to move, remove the tapered retaining bolt and, supporting the wheel with one hand, carefully feed the connector wires and ends through the hole noted in the picture. Remove the wheel. | 
