| RE: Vehicle Speed Sensor location
Here is some cruise control wiring data:
Constant 12V+ Red Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+ Pink/Red Ignition Switch Harness
Ground Use Chassis Near Cruise Control Module
Hot Side of Brake n/a Brake Switch
Cold Side of Brake Black/Red Brake Switch
Tach Green/Yellow Coil
VSS Lead Green/White Or Green/Black or Green/Yellow at Radio Harness
Notes: Vehicles with Manual Transmission require Clutch Switch. Some vehicles may require a speed signal generator and/or other parts/adapters not listed above. Rostra® Cruise module switch settings may differ if you use a speed signal generator or magnets and a pick up coil.
|