Benzworld.org - Mercedes Benz Discussion Forum - View Single Post

Serrano15757 · 07-21-2004, 12:01 PM

OK Let me get this straight. By checking the underside of the spring pad you can tell which one is installed? So one tick mark is the #1 pad which is the 5mm thick one. And the one with 5 ticks is the, I believe its the 13 mm. Is that right? I need to lower my W210 after I put on aftermarket wheels. The wheel gap loks awful. Plus the front wheel gap is bigger by 3/8 inch that the rear.

Thanks for your help

07-21-2004, 12:01 PM	#4 (permalink)
Serrano15757 BenzWorld Junior Member Date registered: Jun 2004 Posts: 14	RE: lowering springs OK Let me get this straight. By checking the underside of the spring pad you can tell which one is installed? So one tick mark is the #1 pad which is the 5mm thick one. And the one with 5 ticks is the, I believe its the 13 mm. Is that right? I need to lower my W210 after I put on aftermarket wheels. The wheel gap loks awful. Plus the front wheel gap is bigger by 3/8 inch that the rear. Thanks for your help